Narrow Band UHF Two-Channel Wireless Synthesized Base Station BTR-80N
The BTR-80N is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base.
Narrow Band UHF Two-Channel Wireless Synthesized Base Station BTR-80N
The BTR-80N is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base.
The BTR-80N features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. The unit has a A4M headset jack and works on A1 frequencies.
PLEASE NOTE: If a specific frequency is desired, please contact StageSpot [email protected] prior to purchase.
Features:
Improved Narrow Band wireless delivers an unprecedented 25kHz of modulated band width, allowing more users per channel in the cramped UHF spectrum.
Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment
Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel
Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18 MHz bands
Factory selected preset frequency groups, 1000' operating range, Transmit power level switch
Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically
Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability
Simultaneous support of up to 4 beltpacks, expandable
Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors
Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
Specifications:
General
System Modulation: FM
Frequency Range: A1
Operating Range: Up to 1000'(Line of Sight)
Tuning: 0.005%, Synthesized IFs
Power: 100 - 240 VAC, 50/60 Hz, IEC Receptacle
FCC License: Part 74 License Required
Transmitter
Output: 100mW max.
Deviation: 40kHz
Modular Distortion: <1% @full deviation
Receiver
Sensitivity: <0.8 uV for 12 dB SINAD
Image Rejection: >70dB
Controls and Indicators: Front Panel: 1 x Power Switch 2 x Menu and Set Buttons 2 x Up and Down Buttons 4 x Portable Station Enable/Disable Buttons 3 x 2-Wire, 4-Wire, Select Wired Intercom Control LED Buttons 2 x Intercom In/Out Switches 2 x Auxiliary Interface Enable LED Buttons 2 x Auxiliary In/Out Switches 1 x Headset Volume Control 1 x Headset Microphone Gain Control 1 x Talk Button 1 x Backlit LCD Display 1 x Talk/Overmod LED Indicator 4 x Portable Station Status LED Indicators Rear Panel: 1 x Transmit Power High/Norm Switch 1 x Transmit On/Off Switch 1 x 3-way Telex, RTS, Clear-Com I/C Select Switch
Connectors: Front Panel: 1 x A4M Headphone Jack Rear Panel: 2 x Female Color-Coded TNC Transmit/Receive Connectors 2 x Male/Female 3-pin XLR 2-Wire Intercom Connectors 1 x RJ-11 Base Station Link Jack 2 x Male/Female 3-pin XLR Auxiliary Audio I/O Connectors 1 x 3-pin XLR Male Stage Announce Out 1 x IEC Power Receptacle