The Cryo-Fog LP is a powerful low fog machine. It has the option of either 2200W of output at 220V or 1500W of output at 110V. The Cryo-Fog LP is a fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog gene- rator to held a 5ltr can of fluid. Liquid CO2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO2 is delivered from a low pressure tank (20 – 24 bar), which is connected to the machine via a hose. The intelligent technology ensures sure that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no “warm” fog – which will go upwards – can escape from the machine. The Cryo-Fog LP benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation. This particular Cryo-Fog machine is a Low Pressure system.

Features

• DMX 512 as standard
The Cryo-Fog LP can be controlled via DMX 512. The machine uses three channels on the desk. So, the pump, the fan and also the CO2-valve can be adjusted separately. If the Cryo-Fog is controlled via DMX, the machine can also be used as a “normal” fog generator. The DMX start address can be adjusted and saved via the control panel.

The machine can also be controlled with analogue (0 – 10 V) via a lighting desk or via XLR-remote (option). The fogging process starts automatically as soon as the cooling chamber has reached the right temperature.

A stand-alone-mode is also possible. The adjust- ment of the pump is done directly at the machine. The fan runs automatically. A short press at the start button makes the machine run and the fogging process start as soon as the cooling cham- ber has reached the right temperature. Therefore to keep the start button pressed permanently is unnecessary.

• Control panel
The control panel with LED-display has simple symbols to allow for easy operation. It also protects the control buttons against dirt.

• Fine adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Cryo-Fog to be used in both small and large locations.

Fluid
Special Cryo fluid is needed to run the Cryo-Fog LP.