Doug Fleenor Design LED300 Power Supply

$2,154.90
SKU
DFD-PSU-LED300
Doug Fleenor Design LED300 Power Supply
Click here for common Gobo question answers

Doug Fleenor Design LED300 Power Supply

Have Questions?

Stagespot is here for you. One of our specialists are available to assist you in finding the perfect product.
shadow

The LED300 power supply distributes DMX512 data and 24 Volt power to lighting fixtures and accessories. Primarily designed to power and control Color Kinetics ColorBlast 12 LED fixtures, the LED300 can also drive Color Kinetics iColor Cove, Altman Spectra PAR, and similar products, as well as color scrollers, gobo rotators, and other powered DMX512 controlled accessories.

Power and data are provided on six 4-Pin female XLR connectors. Power appears on pins 1 and 4, Data is provided on pins 2 and 3. Polarity and data levels are field adjustable by a service technician.

The LED300 features our DownShifter technology that shifts incoming DMX512 data and outputs the desired channels as channels 1, 2 and 3. This allows all fixtures to be set to address "001" with the power supply routing the proper signals to the proper outputs. To enable DownShifter mode the address switch is set to a valid DMX512 address (1 through 512). The system then operates similar to a dimmer pack with the first fixture controlled by the selected channel (and the two successive channels), the second fixture being controlled by the selected channel plus three, the third fixture being controlled by the selected channel plus six, and so forth.

DownShifter mode is disabled (so DMX512 data passes through to every output unmodified) by setting the address switch to 000.

The LED300 can provide 5 volt differential or single ended 24 volt data. The majority of DMX512 controlled accessories that operate on 24 volt power use 5 volt differential data. Original Color Kinetics ColorBlast and iColor Cove products also used 5 volt differential data. Newer Color Kinetics ColorBlast 6 and ColorBlast 12 require 24 volt single ended data (3-wire protocol). Control data is placed on pins 2 and 3. Differential data uses pin 2 for data- and pin 3 for data+. Single ended data places the same signal on both pin 2 and pin 3 so either pin can be used for control.

The LED300 is convection cooled (no fan) for silent operation. The supply is provided with a North American Parallel Blade with Ground (PBG) mains connection. It is internally switchable to nominal 115 volt or 230 volt operation.

For a $15 fee per unit, you can update your current LED300 to Software Version 2.2. Do the upgrade in the field, or send it in and we will perform the update in the shop. To purchase this upgrade, please Click Here

LED300 Data Sheet
LED300 Software V2.2 Release Notes

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Warranty

Manufacturer 1 Year Limited Warranty

Our Warranty, Return & Exchange Policy

Visit our No-Risk Warranty

Visit our Automated Returns, and we'll guide you through the quick and easy return and exchange process.

WR
You May Also Like

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.

© Content 2002-2024 StageSpot, LLC. All Rights Reserved. Developed by CzarGroup Technologies