Rosco Flamex PC for Paper & Cardboard

$97.75
Only %1 left
SKU
ROSPNT-FLAME-PC
Rosco Flamex PC for Paper & Cardboard
Click here for common Gobo question answers

Rosco Flamex PC for Paper & Cardboard

Have Questions?

Stagespot is here for you. One of our specialists are available to assist you in finding the perfect product.
shadow

Due to the nature of this product there is a $75 minimum paint order and a drop ship fee will be assessed on your order. We will contact you prior to processing this order with the amount of that fee. If you have questions, please feel free to contact us at 888-567-8243 or email us at [email protected]

1 Gallon Rosco Flamex PC for paper and cardboard.

Flamex PC was formulated specifically to treat the many paper products commonly used in props and scenery construction. Most paper products without a wax coating or other water resistant properties can be effectively treated.

Using Flamex PC
Rosco Flamex PC has been premixed and does not require any further dilution. The method of application and the amount of Flamex required for sufficient treatment varies with the materials in use. Some discoloration and wrinkling of paper products may occur as the paper materials dry. Multiple light treatments will minimize this.

Coverage
One gallon of Flamex PC will treat approximately 400 square feet (37 square meters) of fabric.

PLEASE NOTE: Coverage amount is an average approximation only. If you have questions regarding coverage on a specific project, please contact Rosco directly at 800-ROSCONY and ask to speak with the Flamex manager.

Applying Flamex

Dipping:
This is the most efficient method of impregnation. Immerse completely for complete saturation, and hang to dry. Some wrinkling and shrinkage of thin paper products or paper covers may occur

Brushing:
Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.

Spraying:
In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the material. Use a Hudson-type sprayer with a medium nozzle setting. To insure adequate penetration of Flamex allow material to dry after first application, then reapply a second time.

Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.

Certification and Testing
Flamex PC has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.

Storage
Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.

Disclaimer
Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.

MSDS Sheets
California Fire Marshall Resigtration

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Warranty

Manufacturer 1 Year Limited Warranty

Our Warranty, Return & Exchange Policy

Visit our No-Risk Warranty

Visit our Automated Returns, and we'll guide you through the quick and easy return and exchange process.

WR

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.

© Content 2002-2024 StageSpot, LLC. All Rights Reserved. Developed by CzarGroup Technologies