Compact and easy to use, the RC4 Wireless DMXmrx DMX 512 receiver is the perfect solution for a fixture or a prop positioned in an unusual or a hard to reach location. Simply Velcro or tie-rape the DMXmrx to the fixture or prop, connect the XLR cable and power and you’re done. Working with the DMXmrx is as easy as that.
The RC4 Wireless Harmonized Design philosophy applies to the DMXmrx; operation of this receiver is the same as many of the other RC4 receivers. So there’s nothing new and complex to learn; the DMXmrx is simply a smaller version of an old friend.
Every DMXmrx comes with a free RC4DMX5F 3.5mm miniplug to 5-pin female XLR adapter, making it easy to plug into any standard DMX fixture. An AC adaptor with wire tails is optionally available for situations where 90 – 250VAC is accessible.
Learn more about the DMXmrx and what it can do at the RC4 Wireless Knowledge Base.
RC4Magic Series 3 2.4SX DMXmrx Specifications
Dimensions: 2.4? x 1.4?x .78? (61mm x 36mm x 20mm)
DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port
Power Input: 6VDC – 35VDC, 0.4W idle draw, screw terminals
Series 3 Versatility: RC4MagicPC Dongle Mode when connected to PC via USB CodeLoader cable
Sensors: Input voltage, internal temperature
RF Antenna: hidden internal, omnidirectional
All prices and specifications are subject to change without notice.