Account confirmation is required. Please, check your email for the confirmation link.
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
The RC4Magic S3 2.4SX DMXpix Dual Pixel String Driver can be used to easily control up to two strings of pixel tape, and enables users to create beautiful and unique pixel effects, all without wires, and all without using an excessive amount of DMX channels.
Using the RC4’s patented Custom Pixel Profiles, combined with keyframing, designers can create beautiful unique pixel patterns and effects for up to 1000 pixels while keeping the number of DMX channels to a manageable level. The compact, wireless DMXpix receives all 512 channels of a DMX universe and controls 2 pixel strings of up to 500 pixels each (1000 pixels total). With the DMXpix, designers can now say goodbye to complex consoles, media servers, and endless wiring.
Learn more about RC4’s patented Custom Pixel Profiles and keyframing at the RC4 Knowledge Base
Worried about pixel string compatibility? The DMXpix is incredibly versatile and supports all popular pixel string protocols, including WS2801, WS2812, APA102, LPD8806, and more. Need to install the drivers for a new pixel product? It’s easy using the RC4 Wireless CodeLoader; simply download the drivers installing them on the DMXpix.
Trying to match the colors of pixel strings from different manufacturers? RC4 Wireless makes it simple, using RC4 ColorMatch™. Adjust the color balance of each string to ensure a consistent palette, even when products are from different manufacturers, have different control protocols, and even have differences due to variations in LED binning. The Pixel Color Order feature ensures all pixels in a large system will address colors with the same sequence, usually red, green then blue. By doing color correction and pixel color order in the pixel driver, rather than managing this in a console or media server, multiple different pixel strings can be controlled from the same DMX channels without undesirable color variation.
Any number of receiver-dimmers can be used in an RC4Magic Series 2 or Series 3 systems
The internal wireless DMX receiver operates identically to the DMXio in receiver mode. The RC4 DMX miniplug port can be used with a range of DMX adapters, including 3-pin and 5-pin male and female XLR connectors. The most common adapter is the RC4DMX5FA with 5-pin female XLR connector.
RC4Magic Series 3 2.4SX DMXpix Specifications
Dimensions: 2.4?x 1.3? x .78? (60mm x 35mm x 20mm)
Power Input: 5VDC – 35VDC, 0.4W idle draw
Power Connection: 2pin Phoenix Connector
Pix A, Pix B: 4pin Phoenix Connectors
i2c – 6-position (2×3) DIL 2.54mm header
Pixel String Protocols: WS2801, WS2811, WS2812, LPD8806, APA102. Each of these types is unique. Numerous other types are identical or compatible with these. Additional driver types can be installed in the field using the RC4 CodeLoader.
i2c Protocols: Communicates with host device (Arduino, Raspberry Pi, etc.) as an I2C slave emulating read-only-memory. The first 512 memory locations contain current DMX universe channel levels.
Sensor: Total current draw
DMX In/Out: RC4 3.5mm TRS receptacle (non-standard). Optional adaptors to XLR 3-pin, 5-pin, male, female, are available. Data output compliant with ANSI E1.11 (DMX512-A). Data input compliant with E1.11 , ANSI E1.20, ANSI E1.37-1 (RDM).
RF Antenna: hidden internal, omnidirectional
All prices and specifications are subject to change without notice.