Doug Fleenor Design DMX to DALI Interface

$927.35
SKU
DFD-IF-DMX-DALI
Doug Fleenor Design DMX to DALI Interface
Click here for common Gobo question answers

Doug Fleenor Design DMX to DALI Interface

Have Questions?

Stagespot is here for you. One of our specialists are available to assist you in finding the perfect product.
shadow

The DMX2DALI interface has an opto-isolated DMX512 input and two DALI output ports. Each output port is capable of individually addressing 64 DALI devices. There are also modes to allow for single channel control of all ballasts (broadcast mode), stand alone operation, and a simple fixture addressing facility.

The DMX512 input is received via three-position two-part terminal block connector. The DALI protocol is output is via three-position two-part terminal block connectors. LED indicators display DMX input signal, power and a Mimic of channel one. A three-digit thumbwheel switch is provided to set the starting address.

A test feature allows bringing any output to full by setting the front panel switch to 601-728.

The first DALI port can be used to set fixture addresses by powering up the interface set to address 901-964. Fixtures to be addressed are identified by "physical selection" (removing a lamp).

When 1 channel broadcast mode is selected, all fixtures respond to the DMX address set on the interface.

Design DMX to DALI Data Sheet
Design DMX to DALI Drawings
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Warranty

Manufacturer 1 Year Limited Warranty

Our Warranty, Return & Exchange Policy

Visit our No-Risk Warranty

Visit our Automated Returns, and we'll guide you through the quick and easy return and exchange process.

WR
You May Also Like

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.

© Content 2002-2024 StageSpot, LLC. All Rights Reserved. Developed by CzarGroup Technologies