This Par System from ADJ is a great all in one solution for wedding DJ's, bands, and entertainers on the go. With 4 30W RGB LED pars this system offers a wide color wash with very low heat. In addition to the 4 fixtures mounted below the bar, ADJ has provided two mounts on the top of the bar for small lighting fixtures as well as power in the bar for these fixtures. You can now have color washes to light the dance floor and add your gobo lighting projector to the top of the bar. Instead of carrying multiple systems, everything is now in one spot.
The system also comes with a foot pedal to control specific functions of the pars and a remote that can be used. This can also be plugged into any lighting control board as well.

System includes:

• 4x COB LED Par Wash Fixtures

• 1x Foot Controller

• 1x Lighting Stand

• 1x RF Remote Control

• 1x Stand Bag

• 1x Soft case for lighting system

Features:

• COB LED Par Wash System with 4 Par fixtures

• COB Technology (Chip On Board) produces powerful, smooth RGB color mixing with rich palettes of color

• Smooth RGB Color Mixing (fast or slow color change operation)

• Great for Stage Lighting, Bands, Night Clubs & Mobile Entertainers

• Emits less heat on performers on stage as opposed to conventional stage lighting

• 4 Operational modes: Sound Active, Auto Run, Built-In Programs, & DMX-512

• Stand Alone or Master-Slave Setup

• Pixel Flip option changes pixel orientation

• 14 Built-in Programs

• 5 DMX Channel modes: 3, 5, 9, 12 and 18 channels

• Digital DMX Display with 4-button menu for easy navigation

• 3-Pin DMX In/Out

• Strobe & Pulse LED Effect

• Electronic Dimming: 0-100%

• 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)

• Beam angle: 90-degree

• Includes 25-degree beam angle lens kit

• Long Life LEDs (Rated at approximately 50,000 hrs.)

• Foot Controller Features: Mode, Black Out and Program Change

• RF Remote Control control up to 25 meters

• Light Source: Each fixture has 1x 30-Watt TRI Color COB LEDs

• LUX @ 3M: 1345

• Power Draw: 144W Max (entire system)

• 2x power plugs on rear or plug in other lighting fixtures (120V = Edison or 230V = Shuko)

• Includes hardware to mount lighting fixtures on top of bar

• Multi-voltage operation: AC 100V-240V 50/60Hz (IEC Input)

• Dimensions (LxWxH): 39.5” x 12.75”x 3.25”/ 1000 x 320 x 82mm

• Weight: 35 lbs./ 16 kg. (Fixture Bar, Stand & Controller)

User Manual