The ADJ Fog Fury Jett is a 680 watt high velocity vertical fog machine uses ADJ's new advanced heater technology. The Fog Fury Jett produces a dry, even blast of fog that will spout up to 25ft in the air. Use the 12 x 3 watt RGBA LEDs to mix color and light the jets for a custom look. The high performance pump minimizes chances of clogging and requires little time between each blast. The resovior can be attached in multiple locations, allowing the unit to be hung, pointed up, down and sideways to achieve any special effects look desired.

The ADJ Fog Fury Jett uses 3-pin DMX, and has a wireless remote included.

Specifications

• 700W professional DMX vertical Fog Machine with 12x 3-Watt LEDs

• High performance pump for optimum output

• ADJ’s Electronic Thermo Sensing (ETS) technology

• Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging

• 3 Operational modes: Manual, Remote Control, or DMX Controlled

• 5 DMX Channels, 1, 2, 3 5 or 7 ch

• 4-button control panel & LCD display on rear panel

• 3-pin DMX XLR In/Out connections

• Convenient carrying handle

• Low Fluid Indicator on rear

• Warm-up time: 9 min

• External fog fluid tank: 3 Liter

• Fog Output: 20,000 (cu.ft/min)

• Tank can be mounted to either front or rear so that the effect may be pointed up or down

• Included Accessory: ADJ FFJWR - wireless remote

• Power Connection: IEC AC In

• Safety Loop on board 

• Only use high quality, water-based fog fluid

• Light Source: 12x 3-Watt LEDs, (3 Red, 3 Green, 3 Blue & 3 Amber LEDs) 

• Heater: 700W

• Voltage: AC 120V, 230 or 240 50/60Hz (non switching)

• Power Consumption: 730W (Full on)

• Dimensions (LxWxH): 15.5” x 12” x 7.5” / 397 x 302 x 191mm

• Weight: 16 lbs. / 7.1 kg.