City Theatrical Wireless Dimmer 15A(Discontinued)

Power: 12V DC, 200mA, From Load Battery Power
DMX Addressing: any DMX address 1 512, configured with (3) standard BCD switches
Max output: 24VDC 15 Amps
Bump button for load test
Internal diagnostics
Switch selectable dimmer curves and non-dim mode
Power and load connectors: Anderson Power 1327 series
Protective Features

Low Battery Power: If the connected Battery drops below a preset voltage, the Dimmer will shut down, and will not restart until reset (the Low Battery indication will light). This feature protects rechargeable batteries from discharging to the point where they cannot be recharged with a standard charger. The standard factory set cut-off point is 8.5VDC. Other settings are available on a custom basis, please consult City Theatrical.
Internal Watchdog for DMX processor and Dimmer Processor
Internal reverse power polarity protection: The internal power supply circuitry is designed to protect the control electronics from damage if the battery leads are accidentally reversed or plugged into the DIMMER OUTPUT connection.
Hold Last valid DMX Level: If DMX is lost, the WDS 15A Dimmer will hold the last valid level for ~ 5 minutes, and then fade to black.
depending on DMX failure mode) and the load output will be turned off.

The WDS Wireless Data System represents the latest innovation in wireless DMX 512 control technology. The WDS System is compact, durable, flexible, economical, and simple to use.
DMX 512 control data from any standard DMX 512 console is input to the WDS Transmitter, which broadcasts it to the WDS Receiver (or Receivers). The WDS Receiver then outputs the signal as standard DMX 512 data, which can then be connected via standard cables to WDS 15A Dimmers or other devices such as moving lights, effects, etc.