ETC Source Four 15-30° Zoom Lens

This is a replacement zoom lens assembly for standard sized ETC Source 4 fixtures. Works with both HPL and LED versions*

Unlike fixed lens tubes, this zoom lens require the removal of the shutter barrel assembly.  This takes less than a minute. All you need to do is loosen the top/bottom screws which allow the shutter barrel to rotate, then rotate the shutter barrel 45 degrees and pull it out.  

Designed for use on the following fixtures:

• Source Four LED Series 3 - needs a longer screw (HW5832)
• Source Four LED Series 2 and Series 1
• All versions of Source 4WRD - plus reflector assembly
• ColorSource Spot and Spot V
• Source Four ERS (Tungsten/HID)