City Theatrical Multiverse® 2x2.5A Dimmer (P/Ns 5916 and 5917) are small, constant voltage, two-output dimmer designed to be mounted in small spaces such as props, costumes, wands, and candles. They can be controlled wirelessly using City Theatrical’s Multiverse or SHoW DMX Neo wireless DMX/RDM technology, or with wired DMX.
Similar to City Theatrical's Multiverse 5x2.5A Dimmers, these dimmers provide 20-bit PWM resolution and four DMX personality options (two variations of 8-bit and 16-bit control) for extremely smooth dimming at the low end of the dimming curve. Configuration is performed using RDM, such as with a City Theatrical DMXcat®, or with City Theatrical’s USB Configuration program for PC/MAC (available on the "Downloads" tab below).
A plastic case is included with the Multiverse 2x2.5A Dimmer to allow easy mounting to scenery while enabling removal of the dimmer from the case for wiring and configuration. These dimmers are designed and built in the USA by City Theatrical, and are available in the 2.4GHz (P/N 5916) or 900MHz (P/N 5917) band.
These 5916/17 Dimmers draw 0.36W in wireless mode and 0.27W in wired mode.
City Theatrical's Multiverse® 5x2.5A Multiverse® Dimmer (P/Ns 5942 and 5943) is a constant voltage, five-output dimmer that can be controlled wirelessly using City Theatrical’s Multiverse wireless DMX/RDM* or SHoW DMX Neo wireless DMX/RDM technology, or with wired DMX. This dimmer provides 20-bit PWM resolution and six DMX personality options (including: 8-bit (2ch), 16-bit (4ch), 8-bit Tunable White Single (2ch), 16-bit Tunable White Single (4ch), 8-bit Tunable White (4ch), and 16-bit Tunable White (8ch) for extremely smooth dimming at the low end of the dimming curve. It uses detachable input and output connectors to make wiring easy.
MULTIVERSE 2x2.5A 2.4GHz DIMMER and MULTIVERSE 2x2.5A 900MHz DIMMER
Features:
Ideal for props and costumes with a low profile
Supports ANSI E1.11 DMX512-A
Compatible with all Multiverse and SHoW DMX transmitters
Low profile latch connections for power, dimmer outputs, and DMX out
Output port test buttons
Configuration set via RDM
Built-in short circuit, reverse polarity, and over temperature protection
Specifications:
Physical Specifications:
Length (with plastic case): 10.8 cm (4.25 in)
Height (with plastic case): 1.6 cm (0.63 in)
Width (with plastic case): 1.6 cm (0.63 in)
Size of Bare Circuit Board: 81mm (3.2”) x 19mm (0.74”) x 10mm (0.38”)H
Weight: 0.02 kg (0.05 lbs.)
Operating Temperature: 0ºC to 40ºC
Construction: NEMA 4 IP20 ABS Plastic
Connectors: Low profile latch connectors
Mounting: Screw holes in tabs on ends of plastic case
Control Resolution: 6 DMX Personality options, including:8-bit (2ch) , 16-bit (4ch) , 8-bit Tunable White Single (2ch) , 16-bit Tunable White Single (4ch) , 8-bit Tunable White (4ch) , 16-bit Tunable White (8ch)
PWM Resolution: 20-bit
Product Information:
Firmware: User updeatable via micro USB
Configuration: RDM, City Theatrical USB Configuration Program (PC/Mac)
Use Environment: Indoor
Warranty: One year
Manufacturing Origin: USA
Compliance: RoHS, FCC, IC, CE, RoHS, FCC, ACMA, ARIB, IC
