The totally wireless LED100 power supply is targeted at the event industry. Whereas wireless supplies intended for theater may power a luminary for several minutes, event power supplies must power the luminary for several hours. The LED100 powers a Color Kinetics ColorBlast 12 for six hours when on full (100% white) and 24 hours on a rolling color fade. Features include W-DMX wireless control, absorptive-glass-mat sealed lead acid batteries, a built in charger, a battery voltmeter, and a five year warranty.
Features that make the LED100 stand out from other wireless power supplies include:
Doug Fleenor Design engineering and support. Doug Fleenor's customer support is second to none. Their engineering staff designs products to extremely high standards.
Five Year Warranty. Even the batteries are covered. Two 4-pin XLR fixture outputs. The LED100 can drive two 50 Watt fixtures without adapters (four 25 Watt fixtures with wye adapters).
A 5-pin DMX512 direct radio output. The DMX512 output allows the LED100 to act as a (very heavy) W-DMX receiver. The internal batteries will power the W-DMX receiver for five days. The built in charger will power the W-DMX receiver indefinitely.
Large battery capacity. The LED100 uses two 15 Amp-Hour sealed lead acid batteries, over twice the capacity of similar products. Average run time: 12 hours.
All in one unit. The LED100 includes the batteries, charger, W-DMX receiver, and fixture addressing in one package. A 1⁄2 inch bolt is provided to mount a fixture to the top of the supply (fixture not included).
Industry standard W-DMX radio. The LED100 uses a radio receiver from Wireless Solutions, AB. The LED100 works with ANYBODY'S W-DMX transmitter (including Doug Fleenor Design's Marconi).